Made with Xara
Typical DuraVent Duratech Chimney installations. Above image for single story through-the-house, to the right for Through-the-wall. |
![]() |
Typical DuraVent Dura/Plus chimney installations. Through-the-house above, and through-the-wall and sofit to the right. |
![]() |
Typical Security Chimney Installations. The one above is the typical through-the-wall and the one to the right is through-the-house. |
![]() |
SuperPro Chimney Installations; Right and above |
![]() |
| There are occasions
when you will need to offset the chimney to get by the ridge pole or some
other obstruction when going through the house. The image to the right
shows that type of installation.
There may be other times you may need to offset the chimney to get by a short sofit when going out and up the outside wall of your house. The principle is the same. Look in the instructions of the brand you are considering to get the offset measurements of that pipe's elbows and such. |
![]() |