Heat-Fab Crown Forms
These reusable steel forms work great on all masonry chimneys.
Heat-Fab offers you two choices, straight-sided or slanted. The slanted crown form angled at 8", is 5" deep and will create crowns from 10" X 10" up to 56" X 56".
The straight-sided forms are also 5" deep. With them you can create crowns from 10" X 10" clear up to 92" X 92".
For either design, select the appropriate sections, slide them together, adjust to the chimney dimensions, and place on the chimney.
Then pour in your crown mixture and allow it to cure. these forms allow for a minimum 1.5" overhang or drip edge.
Note: To make a complete set, you need to order two pair of forms.
For another spin on crown forms, see our Victorian Crown Forms from Ahrens.