BTO 5" DuraTech Through-The-Wall Chimney Kit
We have put together this kit for those of you who want to install a chimney through your wall, then up the side of your house past your roofline. It is based on a single story ranch style house with a 3 or 4/12 pitch roof with no roof overhang where the chimney will be.
If you have an overhang or soffit you need to go through, you can see a diagram of the typical installation if you click on the "Zoom" button to the right. There are options in the "Customize" section to accommodate your needs as well.
It is your responsibility to make sure you order enough chimney pipe. Your finished chimney needs to be 3 feet above the roofline and 2 feet above anything that is 10 feet away. We can not be sure of exactly how much chimney pipe you need and the kit is only based on an average home as explained above. You are totally responsible for the height of your chimney, Hart's Hearth Inc. cannot be responsible if your chimney comes up too short.
Customizing your chimney: The greatest thing about our Build-to-Order system is that you can configure your chimney with the components you want. You can exchange a default product that we have in place with one that you may prefer. All parts have explanations and details giving you all the information you need to make an informed decision. Click "Customize" below to look at how to customize your kit.
Download and read through the Installation Instructions so you can get an idea what needs to be done for installation. Our Product and Tech Support Team is here ready to answer questions after you read through the instructions and Chimney FAQ.